Please review the following SOPs for MEX2 before your beamtime. These SOPs will guide you through changing sample rulers when running under “vacuum”, venting the user chamber at MEX2, and operating the software.
If you have any questions, feel free to contact beamline scientists Dr. Bruce Cowie (brucec@ansto.gov.au) and Dr. Negin Foroughimehr (foroughn@ansto.gov.au).
MEX2 Vacuum Operation for Sample Exchange:
MEX2 how to start the software for user data:
The notes below are instructions for running samples under “Helium”.
This document explains “HOW TO SET UP” the system so that users can run it and exchange samples in a helium atmosphere. It is NOT a set of operating instructions for users when working under helium; those instructions are provided in a separate guidance document below.
To access the instructions for operating under helium, click on the file below:
MEX2 Magnetic Reference Coupons:
