...
Transmission measurements: the mounting ruler has windows (Photo A) allowing various transmissible samples to be mounted (Photo B). Transmission measurements and sample preparation is difficult at the MEX2 energy ranges. If the transmission is your only option, please contact the MEX beamline scientists before submitting your EA to discuss its feasibility, as transmission is almost impractical to perform at MEX2. Choosing the wrong acquisition mode could result in your EA being rejected.
Sample preparation kit
MEX2 uses a ruler mounting system that allows stacking up to 16 samples vertically, as shown in the image below. Additionally, we offer small brass coupons that enable stacking up to 30 samples on one side of the ruler.
We have designed a sample mount kit specifically for MEX2 users, as shown in the picture below.
If you would like to receive the kit before starting your beamtime, please contact the beamline scientists well in advance, and they will assist you with the process.
Contact the beamline scientists well ahead of time.
Our beamline scientists on MEX2:
Dr. Bruce Cowie (brucec@ansto.gov.au)
Dr. Negin Foroughimehr (foroughn@ansto.gov.au)
The document below will guide you through the sample preparation for MEX2.
| View file | ||
|---|---|---|
|
All instructions regarding sample exchange procedures under vacuum and Helium at MEX2 can be found in the link below: