...
Fluorescence and drain current measurements: MEX2 has adopted the magnetic mounting ruler type sample holder (“sticks”) used on SXR fast NEXAFS chamber (Photos a and b). SXR sticks are interchangeable on MEX2, with the exception that on MEX2, samples may be mounted on both sides of the stick. The most convenient method of mounting most samples for fluorescence and drain current measurements is to stick them to the ruler with double-sided Carbon tape (black strips on ruler b). To visualize the beam, the first ~ 7 mm of the ruler will be left blank for the adhesion of a white film (Photos below) that glows when struck with X-rays.
Users are able to purchase the rulers (Toledo 150MSE) and mount samples prior to arriving at the beamline. This can also be done at the beamline (in the case of non-hazardous samples) or in the Synchrotron’s Chemistry lab. Carbon tape and fluorescent paper are available at the beamline.
MEX2 Sample Holders
Transmission measurements: the mounting ruler has windows (Photo A) allowing various transmissible samples to be mounted (Photo B). Transmission measurements and sample preparation is difficult at the MEX2 energy ranges. If the transmission is your only option, please contact the MEX beamline scientists before submitting your EA to discuss its feasibility, as transmission is almost impractical to perform at MEX2. Choosing the wrong acquisition mode could result in your EA being rejected.
...