GISAXS / GIWAXS samples

Use the following spreadsheet as sample list for grazing incident samples. → Link to Google doc!

How to fill out the google spreadsheet for GISAXS / GIWAXS samples

Sample name for each sample
Information on how many shots per sample, critical incident angle, repeated analysis lateral spacing
grazing incidence scattering will be assumed to require gapless detector mode, because most samples are produce anisotropic scattering.
Information on preferred camera length and q-range necessary
Include priorities of samples in sample list
Exposure ( ? ) time?
Every google doc must have same name as label on sample holder
Note the estimated run time for each plate and design your experiment accordingly, especially in regard to the amount of samples!

For GISAXS / GIWAXS samples on waver follow the guidelines below:

Waver dimensions

The waver used for your samples should have the following dimensions:

NK for details

Label the sample container (e.g. every wafer holder, every well in a well plate)
label the bottom of every sample. Unlike other types of samples, hand written labels written in permanent marker are OK (stick-on labels on the bottom of samples could cause problems). Labeling he bottom of the sample is important to help us avoid mix-ups, and to confirm identity when loading AND unloading samples.
Labels MUST be identical to names used in google spreadsheet
If direction of measurement in relation to the X-ray beam matters, label the sample holder and the bottom of the sample clearly, with arrow pointing in X-ray direction(s).

ONLY measurements at ambient temperature are possible, NO high or low temperature measurements can be realised by mail-in.
Samples MUST be compatible with vacuum conditions, ALL samples will be measured in our vacuum sample chamber. We cannot support solid-liquid GISAXS/GIWAXS by mail-in.
Beamline scientist must be on site to exchange samples. Runtime is limited to standard working hours. Please consider sample amounts accordingly! Currently only 6 samples at a time can be loaded. Your mail-in beamtime allocation has been based around samples being run during day-shift hours.