Applying for beamtime at the AS MEX1 and MEX2 beamlines

Summary

This document consists of a set of guidelines to prepare quality proposals at the Medium Energy X-ray absorption beamlines, MEX1 and MEX2.  The MEX1 beamline offers similar capability to the XAS beamline, but has reduced flux and a smaller energy range (3.5 – 13.8 keV).  The MEX2 beamline (energy range 2.1 – 3.2 keV) is more similar to the NEXAFS system at the Soft X-ray beamline.  Please ensure that you read this entire document, it is similar (but not the same) as the XAS beamline guidelines, as failure to follow these guidelines is likely to render your proposal uncompetitive.

...

If you answer “NO” to any of these questions; STOP.  Go back and take the necessary steps to answer “YES”, otherwise your proposal is likely uncompetitive.

Tips for preparing a proposal

• Beamtime applications will first be assessed against technical feasibility and safety (Yes/No pass criterion). It is thus super important that the technical feasibility of your experiment is 100% clear and you have chosen the correct MEX1 or MEX2 beamline.

• Give yourself plenty of time to develop your proposal. A proposal “hastily thrown together” may save you time, but may not be competitive and thus waste the time of the reviewers and members of the program advisory committee.

• If you need to consult with the beamline scientist team, give them enough time to work with you ahead of the proposal deadline. You are not the only person wanting their input.

• Be clear, concise and to the point. Avoid irrelevant information.

• Make sure you propose an experiment that is feasible (see below for more detail).

• Consider the skills required to make a beamtime successful. Who would be attending the experiment? Will the right people be available? - If you do not (yet) have the skills or knowledge in your team, consider collaborating with someone experienced in your field. Feel free to ask the beamline team for advice.

• Check your proposal PDF before you submit it! Make sure the relevant information is complete and easily found by the reviewers.

Resubmissions

Is your proposal a re-submission of a previously unsuccessful one? If yes, please provide concise information (max 50 words) on how this proposal was improved or changed. Upload this as a short list of dotpoints as a figure with sufficient resolution.

Technical feasibility and your proposed experiment

For the most current information on beamline capabilities, please consult the beamline’s webpage:

...

• In-situ experiments. MEX is not yet taking in-situ experiments. Those should be submitted to XAS beamline.

• Safety concerns. Explicitly say what the potential risks are that are associated with your experiment or equipment. Examples of problems encountered in the past include: Your experiment uses high pressure, toxic gases, high voltage, etc, and you have not contacted us to discuss safety; your experiment produces toxic gases, but you do not tell us how much; we note that there are electrical hazards, but there is not enough information to be sure; etc. Remember: Risk = Hazard x Exposure.

• Wrong beamline. Past occurrences include proposals for NEXAFS experiments at the Soft X-ray beamline (e.g., C-K edge studies) and XANES imaging measurements at the XFM beamline. Note that MEX1 and MEX2 are two different beamlines.  Make sure you are applying for the correct beamline.

• Insufficient experimental detail. Most often this means there is no table giving detail on samples, detection mode, concentrations, edges, scan times, etc. Thus, we do not know what you are trying to do and how long it should take.
  Other examples include: you mention in-situ setups or measurements but have not talked to the beamline scientists about this; you bring a specialised apparatus, but it is unclear whether or how it will fit into the beamline environment; etc.

• Conflicting or confusing information. The experimental plan is confusing or conflicting with the rest of the proposal. It is thus unclear what the experimental parameters are.

• Closely spaced absorption edges and/or overlapping fluorescence lines from different elements in your sample.  The mix of sample elements means that the corresponding absorption edges are too close together to perform the measurements you need to answer your scientific questions. In the case of fluorescence XAS, there are overlapping fluorescence lines, which means signals from two elements cannot be separated. Watch out for first row transition elements or complex mixtures of lanthanide group elements.

• Highly diffracting materials. Xray Absorption Spectroscopy does not work well on crystalline materials. Especially in case of films on a crystalline substrate, there are issues with fluorescence detection. Talk to the beamline scientist team first.

• Liquid or moist samples at room temperature. The X-ray beam almost always generates bubbles in liquids, thus rendering XAS spectra unusable. In wet or moist samples, radiation damage sets in very quickly. We expect this to be less of an issue on MEX than XAS, however you should talk to the beamline scientist team first.

Writing the experimental section

For the experimental section, consider these important points:

...

Outcome of previous Australian Synchrotron experiments (past 3 years)

Include tabulated information about publication and outcomes of past beamtime using below template. If there are no outcomes yet, provide information when they can be expected. If previous results are insufficient for producing outcomes, give reasons.

...

If you are new to synchrotron radiation experiments, provide evidence of your experience in your field, list your key publications and describe how synchrotron radiation will advance your science. Note that if you are a student you cannot be the Principal Investigator.

The need to use Synchrotron Radiation

Justify why XAS measurements are required for your samples and why the information you seek cannot be obtained using other techniques. Since XAS is not a laboratory-available technique, the need for access to synchrotron radiation to perform XAS measurements is considered a given, so in this section focus on why you need to perform an XAS experiment.

Experimental needs, special requirements and hazards

Be as specific and as concise as possible, particularly if you intend to use your own equipment. User-supplied equipment must comply with the safety requirements of the facility before arrival on site. If you seek to use your own equipment or perform a ‘non-standard’ experiment, you have to consult with the beamline scientist team before submitting your application.

NOTE:  MEX is not currently accepting in-situ experiments.

Example experimental section

Example of a basic experimental section for a XAS proposal (note, change “XAS beamline” to “MEX beamline”). For more complex experiments (e.g., in-operando studies), additional detail needs to be included. Please consult with the beamline scientist team to discuss details or questions.

...