MX3 Home page
MX3 is fully operational and offering single pin and in-tray screening modes for both protein and chemical crystallography.
Beamline Updates!
Online training was run on the 18th March 2026. The recording is available for viewing here:
New data interface software will become available to MX3 users called MXPrism. MXPrism is being developed at the Australian Synchrotron to be your interface to all you experimental results, as well as managing your samples and projects.
Rastering map of two crystals on a grid in MXPrism
Data processing results in MXPrism
MX3 beamtime is available through the Collaborative Access Program (CAP), Rapid Access, Preferred Access and Commercial Access programs.
Access to MX3 is only available to BRIGHT funders. A list of BRIGHT funders can be found on the following webpage.
https://www.ansto.gov.au/facilities/australian-synchrotron/project-bright#content-partners
Running an experiment on MX3
Before your experiment
| During your experiment
| After your experiment |
|---|---|---|
| ||
| ||
|
|
|
Click on a box for more info